Hey My Crocheters!
Today we are going to talk about blocking our projects. Blocking is typically done with garments or granny squares. Blocking helps to meet pattern measurements. Blocking also helps with curling edges because it helps to flatten them out. Also, depending on the stitch used blocking can help show the definition of the stitches. So what are some methods for blocking?
Wet Blocking: This is a great method when talking about blocking natural fibers, such as cotton or wool. To wet block you soak your entire piece in water and let it set for about 10 minutes. The water will soak in and will relax the fibers and stitches. For wool you should mix in a bit of wool detergent to help those fibers relax and become more pliable. After you piece is nice and wet take it out and lay it on a towel. It is recommended to use a dark colored towel in case of color bleed. Roll the piece up to wick away the excess water. Next you will use t-pins or blocking combs to lay your piece flat on blocking mats. I use these blocking mats: https://amzn.to/4cKUfyE Finally, let the piece dry completely.
Steam Blocking: This method uses a steamer to relax the fibers. You will take your piece and attach it to the blocking mats using the t-pins or blocking combs. Then you will take a steamer and steam the piece. I use this steamer: https://amzn.to/4dLAcBv Finally, you will let you piece dry completely. This method is really great for synthetic fibers like acrylic.
These two methods will work for any piece and come in really handy when you want your project to look as defined and flat as possible. I hope this helps.
Happy Hooking!
Affiliate link disclaimer
This post contains affiliate links. This means that if you make a purchase from those links, I will receive a commission at no additional cost to you. Thank you for your continued support!
Comentarios